Staying Cool in Ancient Persia
The Persian plateau is a region that is known for being a rather hot place to be, with a large portion of it being hot and arid deserts. But this didn’t stop people from settling down and forming thriving nations, controlling areas larger than most modern countries, even as far back as the classical era and the mighty Achaemenid Empire. But as you know, most humans generally don’t like to be hot, and as such, when living in warmer climates, we will seek out ways to escape the heat. At this, the ancient Persians found three ingenious ways to replace air-conditioning in the hot deserts of Persia.
Starting with the first and tamest of the three is the Qanat, effectively the Middle Eastern version of the Roman aqueduct. Developed around 3,000 years ago, the Qanat served as a reliable way to carry water into the arid regions of the area for irrigation and consumption. This system is so effective for its cost that it is still widely used in Iran, maintaining large farmland and orchards. While the qanat may not be as fancy as the aqueduct, they follow a similar engineering concept. A Qanat starts from an elevated place, where a mother-well is dug toward a source, either an underground reservoir or a river source. Then underground tunnels are dug into a gentle slope to carry out the water without eroding the walls, with clay preventing water from slipping into the rock. Subsidiary wells are dug at intervals to provide fresh air as well as access points for workers during maintenance. In the valleys and plains, the water is carried out by open-air canals toward the various places that need it. For further details about the system, you are welcome to go check my post of the Roman Aqueducts.
The second, and fancier system is the Badgir, the wind-catcher, a primitive ventilation system. If you’ve ever seen concept art about ancient Persian architecture, these are the tall square towers that can be found everywhere. These tall structures help cool the inside of houses and other buildings in two different ways. First, when there is a lot of wind, the elevated sections catch the cooler air of the higher altitude and redirect it downward into the living quarters. The second is when wind is lacking, the tall shafts allow the hot air to rise up, leaving the cooler air to go down in its stead. That can also work in conjunction with a Qanat, as the fresh water also helps bring cool air for the Badgir to work with, but this isn’t a requirement.
The final and wackiest of the systems is the Yakhchal, which is effectively an ice-making machine. No I am not trolling you, the ancient Persians really did establish ice production facilities in the middle of the desert and are, in fact, the oldest structures ever found for such a purpose. Its most prominent part is the 15-20-meter-tall dome, and as such serves as its poster feature of the structure. The dome serves to cover a large pit which serves as a storage room for ice. The walls, 2 meters thick at the base, were made of a special mortar composed of sand, clay, ash, egg white, goat hair and lime that gave it not only excellent insulation and waterproof properties. To further cool the inside, two large openings were cut at the base while the top of the cone was left open. This allowed air to circulate upward, evacuating hot air and letting cooler air go in. A Qanat, yes again because these things were everywhere in the old days, also brought fresh water in a larger but shallow pool. This water served both as another cooling mechanism as well as ice production facilities... in winter at least. Yeah sorry for that, no actual ice making in the scorching heat of the desert. The water reservoir was kept as cool as possible by a shade wall, as the temperature could fall by up to 15 degrees Celsius when not exposed to sunlight. Finally, some Yakhchals were equipped with Badgirs, because when you have to combat heat, you need to assemble the whole team.

Comments
Post a Comment