Aqueducts - the Working of Rome's Greatest Infrastructure
While the Roman Empire is most well known for its military prowess, and for good reasons. After all, they were one of the most capable nations in the theatre of war, but this was far from the only field they were skilled in. You see, Romans didn’t simply have an advanced military but were also capable of great feats of engineering as well to support their growing empire. Out of all of their innovation in architecture, the aqueducts are arguably their most important one, being able to carry drinking water over long distances to areas in need of more supplies.
Now the aqueduct system isn’t exactly obscure, as most people who studied a little bit about the Roman Empire will know the iconic arched bridge traversing valleys. However this is nothing but the tip of the iceberg, being comparable to the power line to the electrical grid system used in modern days. This means that the aqueduct system is more than just the bridge, as it also encompasses the source, purification, transport, storage, and distribution of drinking water throughout the empire. And now you will discover that system
The story of Aqueducts begins just like everything else Rome was famous for: they copied it from someone else and improved the design. Here, the oldest aqueduct ever found is located in Greece, the favourite target of the Romans' plagiarism, dating back to the 6th century BCE. Here, it was a simple tunnel carved into the rock which provided water to the early city of Athens, and while not as majestic as Roman’s models it was still 1 km long. And remember, people back then had no machineries, everything was dug out using pickaxes and sheer manliness. Then Rome showed up in Greece, saw all the cool things they were doing and brought them back home which included Aqueducts. And boy did they put these things everywhere, with each counting at least one, with many having multiple, like Rome, which counted 11 at its height. And you know that kilometre-long tunnel the Greeks did in Athens? Well, the Romans took one look at it, laughed ‘rookie numbers,’ and built them on much larger scales. Many easily reached tens of kilometres long, with the longest ever recorded, located in Constantinople, being 426 Km in total. Yeah, Rome wasn’t messing around with its public projects.
Now for the composition of these behemoths, everything starts with a water source. When designating the source from which the aqueduct starts, there’re two factors they must meet: it must be higher than the destination (more on that later), and it must be of a certain size. Once a proper place has been found, construction can begin. As such, finding a proper source tends to be the most difficult part in the construction process, and is the prime reason why they were so bloody long. Lakes were almost always disregarded as the roman saw them as the most unsanitary source, and they weren’t wrong on this one. Rivers, while still requiring treatments, were safer but had that nasty habit of moving around, and aqueducts were meant to stay in the long term. As such, most of the time Romans chose hillside and mountain springs as they tend to stay in place and provide the safest water in great quantity.
Once the source was located, the catch-basin could be built, which was here to collect and purify the gathered water from the source. Roman doctors were well aware of the danger of tainted water, which is why the number one concern of aqueduct engineers was keeping it as clean as possible. Firstly, to get rid of heavy debris, like sand, sediments and dirt, settling tanks were employed and were generally located not far from the catch-basin. These tanks employed the power of gravity to remove these heavy debris due to the waterways being located in the upper sections. All that was left was for maintenance workers to go redirect the flow of water to other tanks when one was filled up. For lighter debris, like insects, leaves and dirt, more complex settling tanks, called piscinaes, were employed to counter this issue. These worked by having water flow into one basin and be transferred to another one through pipes running under the structure so the floating debris couldn’t follow. As a result, aqueduct water was exceptionally clear and safe to drink, making water fountains the favoured water gathering spot for Roman citizens.
Aqueducts were also quite efficient at avoiding waterborne pathogens, albeit not intentionally, as bacteria were completely unknown to the Romans. You see, the main source of water-borne illnesses, like polio, came from animals' excrement and urine. But since aqueducts took their water directly from its source and were closely watched, animals didn’t get the chance to taint it with their feces and thus prevent diseases.
Now that we have a source of water, and a way to keep it clean, now comes the largest section of the project: transport. First of all, since the Romans had no electric water pumps, because this is the antiquity and advanced machinery wouldn’t appear for over a millennium, they had to find another force. Remember when I said earlier that the source of an aqueduct must always be higher than its destination? Well, this is to allow gravity to once again do the heavy lifting. As such, the waterways flowed always downward and at a precise angle to regulate how strong the current is. If the water flew too fast, it could erode the tunnels and leak out, while too slow would cause algae to bloom and contaminate the water. The Romans, being the engineering geniuses they were, designed a tool called the dioptra to always ensure the correct slope was maintained.
Meanwhile, the water itself was transported in a pipe system which, sorry to break it to you, was mostly found underground. Sorry, while the big arch-bridges may look super cool and all, they were also difficult and costly to build, so engineers tried to avoid them as much as they could. The underground pipes, as such, followed the surrounding landscape, being built human-sized so workers could traverse them for repair, with the water itself staying at knee-deep. These tunnels were built out of large stone or lime block, with a waterproof cement coating inside to avoid leaking.
When staying underground became impractical and they had to cross a valley the romans employed two system. The iconic arch-bridge was the most utilized method to overcome such obstacles as they were the easiest to build and maintain the two. Generally, these bridges were built with only a single level of archways, but sometimes elevation forced engineers to stack multiple one on top of the other, with the Pont-du-Gard in France being the tallest arch-bridge found to this date. The second system was reserved for exceptionally large valleys blocking the way, preventing the construction of an arch-bridge. So instead, the Romans turned to the unique property of water pressure and employed an inverted siphon. What this you ask? Well, an inverted siphon is a pipe completely filled with water, allowing its own pressure to flow against gravity. The Roman system employed two tanks at both ends of the valley and an underwater pipe to connect them. This system, however, had the disadvantage of being hard not only to build but also to maintain, so it was saved as a last resort.
So the waterway is constructed, and clean water is being carried to the city center, now what? Well at first water is stored into large tanks, called castellum, before being distributed toward the various fountains, baths and private places for wealthy individuals. City pipes were generally made of lead, which may sound like a really dumb idea due to the danger of lead poisoning but once again the romans though of everything. You see the water flew in such a way that the lead pipe never gets the chance to contaminate the water, so it stayed safe for consumption. Terracotta pipes were also employed, although not as much as lead since it lacked its durability. Wood and carved stone were also materials used for the
pipes, but their cost made them a rare choice.
Comments
Post a Comment